Give your driveway, patio or garage a finish that suits the way you live. We assess your concrete, explain the options and bring preparation, repairs and finishing together.
Refresh sound concrete with cleaning and sealing, transform outdoor surfaces with decorative resurfacing, or choose an epoxy or flake system for your interior floor. We help match the finish to the surface and its use.
Your project, step by step
Let’s find your finish.
Choose your spaces, tell us about each surface and select the look you want. We’ll recommend a starting package for each area and explain what needs checking on site.
The complete approach
Good floors start below the finish.
01 / ASSESS
Understand the surface
Check condition, moisture, existing coatings, traffic, exposure and your finish preferences.
02 / PREPARE
Create the right base
Protect adjacent areas, clean and prepare the surface to suit the selected system.
03 / REPAIR
Address suitable defects
Complete the crack and patch repairs agreed in your quote, preserving movement joints.
04 / TRANSFORM
Add colour and character
Apply the selected resurfacing or epoxy layers, with texture or flakes where chosen.
05 / FINISH
Protect and hand over
Apply the specified finish, inspect the result and explain curing, cleaning and maintenance.
NHland service + product combos
Four ways to transform your concrete.
Each package combines the work and the product stages needed for its finish. The final specification and repair allowance are confirmed after assessing your surface.
01 / Exterior refresh
Concrete Refresh & Seal
For sound concrete that needs a cleaner appearance and a refreshed protective finish.
PREPAssessment, cleaning and the preparation route for bare or previously sealed concrete.
REPAIRAgreed minor static-crack or patch repairs using a suitable Avista repair product.
COLOURClear finish, or an approved tintable sealer option where a colour refresh is wanted.
FINISHSpecified Avista General Purpose or suitable exterior sealer; slip additive where specified.
Quoted after assessment
02 / Exterior makeover
Textured Resurfacing
A new decorative surface for suitable driveways, paths and patios, with colour and texture chosen together.
PREPCleaning, removal or treatment of unsuitable coatings, and system-specific surface preparation.
REPAIRAgreed Avista crack/patch repair, followed by Resurfacing Primer as specified.
COLOURAvista Resurfacing Base Compound + approved colour component, or Colour Compound.
A coordinated floor coating package for suitable garages and other internal concrete spaces.
PREPMoisture assessment, cleaning and mechanical preparation where required by the selected system.
REPAIRAgreed compatible crack/patch repairs and specified primer or first-coat treatment.
COLOURAvista Waterbased Epoxy with Waterbased Colour Tint, or a specified High Solids Epoxy option.
FINISHSpecified coat build; compatible protective topcoat and slip additive included when selected in the quote.
Quoted after assessment
04 / Interior decorative finish
Decorative Flake Flooring
Build colour, detail and protection into one garage or interior floor package. Choose full or partial flake.
PREPSubstrate assessment, cleaning, specified preparation and agreed repairs.
BASESpecified Avista epoxy binder with the approved base colour and required coat build.
DETAILAvista Decorative Flakes or Natural Stone Look Flakes; loose excess removed after curing.
FINISHCompatible clear topcoat, such as Avista Polyaspartic where specified; slip treatment as agreed.
Quoted after assessment
These NHland installation packages use Dulux Avista product options. Product quantities, coat count, primers, topcoats and compatibility are specified for each job. Repairs are included only to the extent listed in your written quote.
Combine outdoor + indoor
Driveway-to-Garage Combo
Pair Textured Resurfacing outdoors with Decorative Flake Flooring inside. One coordinated scope and schedule, with each area prepared and finished using its own suitable system.
Ideal when you want the driveway and garage to feel considered together. Colour coordination and staging are agreed before work starts.
Full flake inspirationA layered mix of grey, white and darker flakes.Texture & fine flecksA closer look at surface texture and light fleck detail.Partial flake inspirationA grey base with scattered contrasting flakes.
Real finish sample photographs from our collection. Colour, texture and sheen vary with the selected system, lighting and application. Confirm your finish from a physical sample before work begins.
Your written scope
What your package covers
Site assessment and selection of a suitable complete system.
Preparation and repair quantities agreed in your quote.
Specified coating, decorative and finishing stages.
Final checks and staged return-to-use instructions.
Cleaning guidance and a maintenance plan for the installed finish.
Clear from the start
What may need separate pricing
Extensive coating removal, deep oil contamination or major levelling.
Structural/moving cracks, moisture remediation or slab replacement.
Steps, edges, coving, complex stencils or extra decorative work.
Special access, furniture removal and weather protection.
The quote identifies inclusions, exclusions, total price, GST treatment and the planned schedule.
Before you choose
A few useful answers.
A good-looking finish should also suit the way your space is used.
Can every concrete surface be resurfaced?
No. We assess strength, coatings, contamination, moisture, slope and cracks first. Resurfacing is decorative; it does not fix an underlying structural problem.
Can epoxy be used outdoors?
These epoxy packages are for suitable interiors. Outdoor coating needs a separately approved complete system; an exterior-rated flake does not make every epoxy binder suitable outside.
Will the finish be non-slip?
We discuss wet use and traffic, then specify suitable texture or slip treatment. The final performance depends on the system and site; adding grit alone does not guarantee a slip rating.
How soon can I walk or park on it?
Walking, vehicles and full cure have different timeframes. We confirm the restrictions for your selected products, weather and actual curing conditions.
Can I buy materials without installation?
This page promotes complete NHland installation packages. Any supply-only request needs a separate discussion about quantities, availability and application requirements.
Plan your project: choose the package, measure your outdoor/indoor area, note the surface condition and preferred finish, then request a site assessment and written quote.